2009 Yamaha F40 Outboard Service Manual, Page 324Get this manual
Clamp bracket and swivel bracket
Removing the clamp bracket
1Remove the trim sensor (remote control model with PTT)
2Remove the ground lead (hydro tilt model)Remove the ground leads and (PTT model)3Remove the self-locking nut e4Remove the clamp the bracket (STBD) f, the swivel bracket g, and the trim sensor cam (remote control model with PTT), and then remove the bolt and the through tube jo
Checking the clamp bracket anode
1Check the anodeClean if there is grease, oil, or scalesNOTICE: Do not oil, grease, or paint the anode
Installing the clamp bracket
1Install the anode a, and then tighten the anode bolt b