2009 Yamaha F40 Outboard Service Manual, Page 70Get this manual
Mounting the rigging grommet
11Align the protrusion on the throttle lever with the protrusion on the shift bracket e12Adjust the throttle cable joint h, and then install the throttle cable joint to the pin of the throttle lever iWARNING! The throttle cable joint must be screwed in minimum of 8.0 mm (0.31 in)Throttle cable locknut k: Nm (0.5 kgfm, 3.7 ftlb) 14Check the shift cable and the throttle cable for proper operation15Install the grommet l