2007-2009 Yamaha F15/F20 Outboard Service Manual, Page 307Get this manual
2REMOTE CONTROL COMPONENTS INSTALLATION 1) REMOTE CONTROL CABLES INSTALLATION
For the remote control box setup, see the instruction which is accompanied together with the package
i) SHIFT CABLE INSTALLATION
8Secure the cable joint with the clip7Connect the cable joint to the pin
3Adjust the inner cable free-play to middle point1Pass the cable into the specific position of grommet2Secure the cable neck with the holder
9Secure the cable joint with the lock nut[5 Nm, 0.5 kgfm, 3.7 ftlb] 6Install the cable joint and adjust it to fit the pin of shift lever4Put the shift lever and RCL lever into Neutral5Adjust the shift lever free-play to middle point10Check the shift for proper operationSetup again if not