2007-2009 Yamaha F15/F20 Outboard Service Manual, Page 117Get this manual
Power unit
Removing the power unit
1Disconnect the start-in-gear protection cable, and then remove the sprocket cover and manual starter(Manual starter model) Remove the sprocket cover and flywheel magnet cover(Electric starter model) NOTE: Before removing the flywheel magnet cover, remove the junction box bracket bolts(Power tilt model) 2Remove the retaining plateDisconnect the battery cables(Electric starter model) Disconnect the battery cables and 10-pin main harness coupler(Remote control model) 3Disconnect the flushing hose 1, cooling water hose 2, and fuel hose 3
S6AG5D03
S6AG5D04