2001 Edition Yamaha F225A and LF225A Outboards Service Manual, Page 238Get this manual

2001 Edition Yamaha F225A and LF225A Outboards Service Manual, Page 238

Bracket unit
Adjusting the trim sensor
1Fully tilt the outboard motor up, and then support it with the tilt stop lever 1
3Install the tilt ram upper end into the swivel bracket with the shaft and circlip 54Tighten the self-locking nut to the specified torque5Remove the anode 7

Back to 2001 Edition Yamaha F225A and LF225A Outboards Service Manual