2001 Edition Yamaha F225A and LF225A Outboards Service Manual, Page 198Get this manual

2001 Edition Yamaha F225A and LF225A Outboards Service Manual, Page 198

Lower unit
2Remove the forward gear and forward gear shim(s) from the propeller shaft housing using press
Removing the propeller shaft housing assembly
1Remove the bolts 1, ring 2, and bolts 3
2Pull out the propeller shaft housing assemblyBearing splitter plate 4: (commercially obtainable) 3Install the propeller shaft assembly in the reverse direction into the lower case
S69J6060

Slide hammer and adapters 4: YB-06096 Propeller shaft and bearing housing remover 5: YB-06335

Back to 2001 Edition Yamaha F225A and LF225A Outboards Service Manual