2001 Edition Yamaha F225A and LF225A Outboards Service Manual, Page 178Get this manual

2001 Edition Yamaha F225A and LF225A Outboards Service Manual, Page 178

Lower unit
Disassembling the forward gear
1Remove the taper roller bearing from the forward gear using press
Removing the drive shaft
1Remove the drive shaft, drive shaft housing, and pinion, and then pull out the forward gearS69J6186

CAUTION:
Drive shaft holder 1: YB-06201 Do not reuse the bearing, always replace it with new oneBearing splitter plate 1: (commercially obtainable)

Back to 2001 Edition Yamaha F225A and LF225A Outboards Service Manual