2001 Edition Yamaha F225A and LF225A Outboards Service Manual, Page 156Get this manual
Power unit
Crankcase cover bolt: 1st: 14 Nm (1.4 kgfm, 10 ftlb) 2nd: 28 Nm (2.8 kgfm, 20 ftlb)
18Install the new gasket and cooling water passage cover, and then tighten the bolts to the specified torque in the sequence shownR
CAUTION:
Before installing the oil pump, be sure to fill it with engine oil through the oil passage k16Install the baffle plate to the specified torqueCooling water passage cover bolt: 12 Nm (1.2 kgfm, 8.7 ftlb)