2001-2002 Yamaha 50HP F50Z/T50Z Ouboard 4-stroke engines service manual, Page 363Get this manual

2001-2002 Yamaha 50HP F50Z/T50Z Ouboard 4-stroke engines service manual, Page 363



Electrical systems

Remove the flywheel magnet nut and flywheel magnetLoosen the pulser coil screws, adjust the pulser coil position, and then tighten the screws finger tight
OFF ON START

Lead color Red (R) Pink Brown (P) (Br)

Switch White Black position (W) (B)

Checking the engine shut-off switch
1Check the engine shut-off switch for continuityReplace if there is no continuitySet the flywheel magnet and then check the gap again and, if necessary, repeat steps 3-5Tighten the pulser coil screws and flywheel magnet nut to the specified torquesPulser coil screw: Nm (0.4 kgfm, 2.9 ftlb) Flywheel magnet nut: 160 Nm (16 kgfm, 116 ftlb)

Back to 2001-2002 Yamaha 50HP F50Z/T50Z Ouboard 4-stroke engines service manual