2001-2002 Yamaha 50HP F50Z/T50Z Ouboard 4-stroke engines service manual, Page 86Get this manual
Power unit Control system 3Align the alignment mark on the throttle cam CD with the alignment mark on the shift bracketAdjust the position of the throttle cable joint until its hole is aligned with the set pin on the throttle camS62Y3340
Align the set pin in the center of the shift bracket with the alignment mark on the bracketS62Y3350
S62Y3400
Adjust the position of the shift cable joint until its hole is aligned with the set pin
The throttle cable joint must be screwed in minimum of 8.0 mm (0.31 in) 5Connect the cable joint, install the clip, and then tighten the locknutCheck the throttle cable for smooth operation and adjust the cable length, if necessary, repeating steps 2-6