1991 Yamaha Outboard Factory Service Manual 9.9 and 15 HP, Page 70Get this manual
3Secure the starter to the cylinder body with the bolt and to the starter stay with the bolts 3Place the COl unit on the bracket and connect to the ignition coil by connecting the leads of identical colorI nsert the leads into the wire holder on the starboard side of the bracket
Electrical equipment 1Install the damper onto the bracket and then install onto the cylinder bodyNOTE: 1Tighten the bolt on the port side onlyThe bolt on the starboard side is also used to clamp the ground lead and is therefore not tightened at this moment2Pullout the two green leads (for lighting) coming from the COl magneto and over to the side opposite the exhaust cover