1983 Yamaha 30EN Outboards Service Manual, Page 95Get this manual
4While holding the bushing (bottom) by hand, insert the steering pivot shaft into the swivel bracket 2Secure the upper front mount rubber to the steering bracket with two boltsTightening torque11 Nm(1 .1 mkg,8.0ftlb)
Upper case and mount rubber 1Place the gasket on the upper side mount rubber, and insert the upper side mount rubber bolt into the holes in both right and left sides of the upper casing so that the square portion of the bolt fits in the square holeI nstall the nut on the bolt and tightenTightening torque: 20 Nm (2.0 m' kg, 14 ftlb)