1983 Yamaha 30EN Outboards Service Manual, Page 77Get this manual
NOTE: 1In the case of the electric starter model, the stay on the port side differs in type2The bolt used to secure the ignition timing plate is longer than two other bolts Connect the CD base to the throttle control lever by the magneto control rodNOTE: Be sure that the adjustable side of the magneto control rod is positioned on the throttle control sideDrive the dowel pin into the cylinder boss
3Secure the starter to the cylinder with the bolt and to the crankcase with the bolt and nutNOTE: One of the bolts on the cylinder side is M8
Neutral starting device 1Connect the plunger to the bolt through the spring by the wire2Screw the bolt into the starter case