Suzuki outboard motors 1988 2003 repair manual., Page 337Get this manual
TRIM AND TILT 9-11 3Remove the screws attaching the field case to the rear brush cover 4Remove the field case with the armature installed from the rear brush coverPush the motor wiring harness toward the case removing the armature assembly5Remove the armature from the field case6Once removed take care to keep the components clean by placing them on clean sheet of paperThe smallest amount of dirt may hinder proper motor ooeration
05009P15
13Install the trimltilt assembly if removed14Lower the outboard15Bleed the trimltilt hydraulic system16Check the trimltilt system for proper operation05009G19