Suzuki outboard motors 1988 2003 repair manual., Page 255Get this manual
POWERHEAD 7-43 05007G3F
Fig58the crankcase can then be torqued into place
FiQ60 Crankshaft assembly-single
cylinder powerhead
surface and crankshaft journal are all mated to each other once the powerhead has been run When installing the connecting rod, the long sloping side must be installed toward the exhaust side of the cylinder assembly and if there is hole the connecting rod, position the oil hole upwardSome piston designs are marked with the word "UP"This side should be placed toward the tapered end of the crankshaftGENERAL INFORMATION
Figures 59, 60 and 61 See