Suzuki outboard motors 1988 2003 repair manual., Page 162Get this manual
5-50 IGNITION AND ELECTRICAL SYSTEMS Step 5
5Remove the screw and nut to remove the brushes6Push down on the ini ion stomer, remove the stooerrind "6" and take off the pinionTo assemble: Assembly is the reverse of disassembly, but the following steps need to be addressed during assembly7Apply water resistant grease to the metal seals and brush holder cover8When setting brush to each brush holder, be sure to place brush spring in position before installing the brush9When installing the front cover and the holder cover in the field coil case, align the mark "A" on the field coil case with the mark "6" in both coversWhen installing the holder cover, take care not to break the brush05005G86