Suzuki outboard motors 1988 2003 repair manual., Page 149Get this manual
IGNITION AND ELECTRICAL SYSTEMS 5-37 9101112Use wire ties to bind together the wiring harnessesInstall the electrical parts holder coverInstall the engine coverConnect the batterv neaative cable
8Install the ignition cover9Install the engine cover10Attach the negative battery cableDT150, DT175, DT200 and DT225 1Disconnect the negative battery cable2Remove the engine cover3The CDI unit is mounted behind the ignition coils on the front of the engine4Disconnect the ignition coil leads and remove the entire ignition coil assembly as unit5Disconnect the leads and remove the CDI unit from the back of the ignition coil assemblyTo install: 6Install the CDI unit onto the back of the ignition coil assembly7Install the ignition coil assembly onto the engine and connect the CDI unit and ignition coil wire leads