Suzuki outboard motors 1988 2003 repair manual., Page 82Get this manual
4-20 FUEL SYSTEM Never operate the engine at high speed with flush device attachedThe engine, operating at high speed with such device attached' runaway lack load the pr0pe''er7 Of On ing extensive damage Start the engine and check the completed workaccompanying illustrations See
The following procedures pick up the work after the carburetors have been removed from the powerheadThe procedures for each of the carburetors is identicalAny differences in float height measurement, pilot screw turns, jets, or any other adjustments will be clearlydentified for the carburetor including locatinnmndol d
Water must circulate through the lower unit to the powerhead anytime the powerhead is operating to prevent damage to the water pump in the lower unitJust five seconds without water will damage the water pump impeller Allow the powerhead to warm to normal operating temperatureAdjust the throttle stop screw until the powerhead idles at specificationRotating the throttle stop screw clockwise increases powerhead speed, and rotating the screw counterclockwise decreases powerhead speed