Suzuki outboard motors 1988 2003 repair manual., Page 78Get this manual
4-16 FUEL SYSTEM 5Remove the main jetUse jet removal tool or wide blade screwdriver6Remove the pilot (idle) jet with the proper tool7Turn in the pilot (idle) screw, counting the turns in (for reassembly later) until it lightly seatsNow, remove the pilot screw and spring8Clean and inspect all the partsCLEANINGINSPECTION
See Figures 36 and 37
Never dip rubber parts, plastic parts, diaphragms, or pump plungers in carburetor cleanerThese parts should be cleaned only in solvent, and then blown dry with compressed airPlace all metal parts in screen-type tray and dip them in carburetor cleaner until they appear completely clean, then blow them dry with compressed air1Carburetor assy 2Jet,pilot 3Screw, pilot 4Float 5Needle 6Screw, throttle stop
7Bolt 8Jet, main 9Pump assy, set
10Valve set 11Knob, choke lever 12Lever, choke
05004G12
Fig35 Exploded view of the DT9.9, DT15 and 1989-97 DT8 carburetor with major parts identified