Suzuki DF200/DF225/DF250 V6 4-Stroke Outboards Service Manual, Page 354Get this manual
LOWER UNIT
Install driveshaft oil seal housing on gearcase, then tighten oil seal housing to specified torque& Driveshaft oil seal housing: 98 Nm (10 kg-m, 72 lb-ft)09926-29310: Driveshaft housing remover
PINION NUT Apply THREAD LOCK 1342 to the threads of pinion nut before threading it onto driveshaft' 99000-32050: THREAD LOCK 1342 NOTE: It is recommended the original pinion nut be used for the purposes of shimming during repairA new pinion nut should be used on final assembly Install washer 1, pinion nut 2, then tighten nut to specified torque& Pinion nut: 144 Nm (14.5 kg-m, 105 lb-ft)09921-29410: Driveshaft holder