Suzuki DF200/DF225/DF250 V6 4-Stroke Outboards Service Manual, Page 323Get this manual
POWER TRIM AND TILT
PTT MOTOR
REMOVAL NOTE: Before removing PTT motor, wash the PTT body with stiff bristle brush and hot, soapy water to remove sand or dirt and dry the PTT body with compressed air
Place the lower of the PTT unit in viseTighten the vise only enough to secure the PTT unit, DO NOT OVER TIGHTENNOTE: To prevent damage to the PTT cylinder use wood blocks, vise jaw protectors, etc between the vise jaws and PTT components before tightening vise