Suzuki DF200/DF225/DF250 V6 4-Stroke Outboards Service Manual, Page 276Get this manual
POWER UNIT
CRANKCASE TO CYLINDER Clean mating surface of cylinder and crankcaseApply SUZUKI BOND to mating surface of crankcase as shown$ Apply bond to mating surface onlyDo not allow bond to contact surface of bearing) 99000-31030: SUZUKI BOND No"1104"
Apply Bond to
marked line
Install five (5) dowel pins 1
Install crankcase to cylinderApply engine oil to crankcase boltsTighten crankcase bolts in three (3) steps following the order indicated belowNOTE: Tighten 10 mm (0.394 in) thread diameter bolts first (following the order shown in figure), then tighten mm (0.315 in) thread diameter bolts