Suzuki DF200/DF225/DF250 V6 4-Stroke Outboards Service Manual, Page 265Get this manual
POWER UNIT
CONROD BEARING Inspect bearing shell for proper contact pattern and signs of fusion, pitting, burning or flakingBearing shells found in defective condition must be replaced
Conrod big end oil clearance Check conrod big end oil clearance as follows; (1) Clean surface of conrod, conrod cap, conrod bearing, and crank pin(2) Install conrod bearing onto conrod and conrod capNOTE: Reassemble each bearing and conrod cap to their original position Do not apply oil to bearing(3) Place piece of Plastigauge on crank pin parallel to crankshaftAvoid placing Plastigauge over oil hole 09900-22301: Plastigauge