Suzuki DF200/DF225/DF250 V6 4-Stroke Outboards Service Manual, Page 163Get this manual
FUEL SYSTEM
FUEL LINE
REMOVALINSTALLATION
Pay special attention to the following steps when removing or installing fuel hoses! Fuel components and fuel hoses after the high pressure fuel pump remain pressurized at all timesTo protect against fuel spray, relieve fuel line pressure before disconnecting or removing components" Do not over bend (kink) or twist hoses when installing When installing hose clamps, position tabs to avoid contact with other parts Be sure hoses do not contact rods, levers or other components with engine either operating or at rest Extreme care should be taken not to cut, abrade or cause any other damage to hoses Use care not to excessively compress hoses when tightening clampsNOTE: Check fuel hose routing(See page xx-xx and xx-xx Check for fuel leakage