Suzuki DF200/DF225/DF250 V6 4-Stroke Outboards Service Manual, Page 122Get this manual
ENGINE CONTROL SYSTEM
SHIFT POSITION SENSOR09930-99320: Digital tester 09930-89220: 3-pin test cordTester range: (DCV (See chart for range 1Turn ignition switch OFF2Connect 3-pin test cord between shift position sensor and wire harness as shown in figure3Turn the ignition switch ON4Connect tester probe as shown in the illustration and check for sensor power source voltageSensor power source voltage: Approx5 V
3 1Shift position sensor 2Adjust screw 3Clutch lever
5Connect tester probe as shown in the illustrationCheck for sensor output voltage while operating remo-con handleSensor output voltage: Shift position Forward Neutral Reverse Output voltage Approx4.1 Approx2.3 Approx0.8 V