Suzuki 50-85HP outboard motors Service Manual, Page 20Get this manual
SERVICE MANUAL side-to-side movement as shown at (AFig, SZ15-18), Nonna! movement (A) is mm (0,20 in,) or less, Maximum allowable crankshaft ronout is 0,05 mm (0,002 in measured at bearing surfaces with crankshaft ends supported, When installing crankshaft, lubricate pistons, rings, cylinders and bearings with engine oil as outlined in ASSEMBLY section
Suzuki OT55OT65 (After 1984)
ELECTRIC STARTER
Models are equipped with the electric starter shown in FigSZI5-19Disassembly is evident after inspection of unit and reference to exploded viewStarter brushes have standard length of 16 mm (0.63 in and should be renewed if worn to 11.5 mm (0.45 in or lessAfter reassembly, bench test starter before installing on power headpropellers are usedVarious propellers are avallable from the manufacturer, Select propeller to provide optimum performance at full throttle within the recommended speed range of 4800-5500 rpm
R&R AND OVERHAULRefer to Fig,
SZ15-20 for exploded view of lower unit
LOWER UNIT