Suzuki 2003-2007 DF60 DF70 Outboard Motors Service Manual, Page 251Get this manual
LOWER UNIT
Replacing propeller shaft oil seal 1Remove the retaining ring and the washer 22Extract the oil seals using the oil seal remover09913-50121: Oil seal remover Do not re-use the oil seal once removedAlways use new oil seal
3Apply the Water Resistant Grease to the inner circumference of the housing4Using an oil seal installer, drive the two oil seals (one at time) into the housingThe lipped portion of the seal should face toward the propellerApply the Water Resistant Grease to the seal lips99000-25161: SUZUKI WATER RESISTANT GREASE 5Install the washer and the retaining ring