Suzuki 2003-2007 DF60 DF70 Outboard Motors Service Manual, Page 196Get this manual
MID UNIT
INSTALLATION Installation is reverse order of removal with the special attention to the following stepsTiller handle assembly 1Install the three nylon bushes into the tiller handle mounting hole and set the tiller handle on the handle bracket2Place the three washers and the spring in positionInsert the handle pivot bolt 53Apply the thread lock to the pivot bolt and tighten the bolt to the specified torqueHandle pivot bolt: 45 Nm (4.5 kg-m, 32.5 lb-ft) 99000-32050: THREAD LOCK "1342"