Suzuki 2003-2007 DF60 DF70 Outboard Motors Service Manual, Page 177Get this manual
POWER UNIT
3Install the crankshaft to the cylinder4Place piece of the plastigauge on the journal with parallel to the crankshaft, avoiding the oil hole09900-22301: Plastiguage
5Install the crankcase (with the bearing) to the cylinder6Apply the engine oil to the crankcase bolts and tighten the bolts by the three stepsCrankcase bolt: 1st step mm 10 mm 2nd step mm 10 mm Final step mm 10 mm N.m (0.5 kg-m, 3.5 lb-ft) 10 N.m (1.0 kg-m, 7.0 lb-ft) 20 N.m (2.0 kg-m, 14.5 lb-ft) 40 N.m (4.0 kg-m, 29.0 lb-ft) 25 N.m (2.5 kg-m, 18.0 lb-ft) 50 N.m (5.0 kg-m, 36.0 lb-ft)