Suzuki 2003-2007 DF60 DF70 Outboard Motors Service Manual, Page 147Get this manual
POWER UNIT
4Apply the seal to the bolts and the nuts99000-31120: SUZUKI SILICONE SEAL 5Tighten the ten bolts and the two nutsPower unit mounting boltnut: mm 23 Nm (2.3 kg-m, 16.5 lb-ft) 10 mm 50 Nm (5.0 kg-m, 36.0 lb-ft)
OIL PUMP SHAFT ENGAGEMENT 1Screw (2 turns) the oil pump stopper with the lock washer and the gasket onto the oil panDo not screw the oil pump shaft stopper fully before engaging the oil pump shaft with the groove in the camshaft2Engage the oil pump shaft with the groove in the camshaft by using screw driver as shownWhile holding the screw driver, tighten the oil pump stopper 1Oil pump stopper: 50 Nm (5.0 kg-m, 36.0 lb-ft)