Suzuki 2002-2005 DF4/DF5/DF6 4-Stroke Outboards Service Manual, Page 95Get this manual
6-28 POWER UNIT Conrod big end side clearance Measure the clearance with the conrod installed on the crank pin as shown in the figure09900-20803Thickness gauge Conrod big end side clearanceStandard0.20 0.90 mm (0.008 0.035 in) Service limit1.20 mm (0.047 in) If the measurement exceeds the service limit, replace the conrod assembly andor crankshaftConrod big end widthStandard23.30 23.80 mm (0.917 0.937 in) Crank pin widthStandard24.00 24.20 mm (0.945 0.953 in)