Suzuki 2-15HP outboard motors Service Manual, Page 25Get this manual
SERVICE MANUAL correct ignition timingLoosen screw securing stator stopper and adjust stopper as necessary to align marksTo check ignition timing, immerse lower unit of motor in waterConnect suitable tachometer to engineConnect suitable timing light to upper spark plug leadstart engine and warm to normal operating temperatureRefer to FigSZ5-16Timing should be 8-12 degrees ATDC at (;50-700 rpmMaximum timing advance should be 25-29 degrees BTDC at 2000 rpm or aboveIf ignition malfunction occurs, check condition of spark plugs, all wires and cOlUlections prior to trouble-shooting ignition circuitUse Suzuki CD! tester 09930-99830 and tester lead 0993088910 to test capacitor discharge unitFollow manufacturer's instructions when using testerStevens Model CD-77 peak voltage tester may be used to test ignition and battery charging componentsRefer to FigSZ5-18 when using Stevens peak voltage tester for test sequence and results Suzuki Pocket Tester 09900-25002 or suitable ohmmeter may be used to test condenser charging coil, battery charging coil, pulser coils and ignition coilsRefer to FigSZ6-14To test condenser charging coil, connect tester between