Suzuki 2-15HP outboard motors Service Manual, Page 15Get this manual
SERVICE MANUAL so engine idles smoothly and will accelerate cleanly without hesitationIf necessary, readjust idle speed screw (11) to obtain 600-650 rpm idle speedMain fuel metering is controlled by main jet (2)Standard main jet for nor mal operation is 11100 on DT5 models, 11115 on DT6 short shaft models, 11120 on DT6 long shaft models, 1195 on DTS short shaft models and 11100 on DTS long shaft modelsStandard pilot jet size is 1120 on DT5 and DT6 models and 1150 on DTS modelsTo check fl oat level, remove float bowl (7) and invert carburetor body (1)Base of float (4- FigSZ4-2) should be distance (D) of 13-15 mm (0.510.59 in away from top of carburetor body flange on DT5 and DT6 models and distance (D) of 2224 mm (0.S7-0.94 in on DTS modelsAdjust float level by bending float tang