Suzuki 2-15HP outboard motors Service Manual, Page 8Get this manual
Suzuki DT3.5 on piston crown points toward drive shaft end of crankshaftCONNECTING ROD, BEARINGS AND CRANKSHAFTConnecting rod, bearings and crankshaft are press together unitCrankshaft should be disassembled ONLY by experienced service personnel and with suitable servo ice equipmentCage roller bearings are used at both large and small ends of connecting rod Determine rod bearing wear from side to side as shown in FigSZ28Normal side to side movement is 3.0 mm (0.12 in or lessMaximum limit of crankshaft runout is 0.03 mm (0.0012 in measured at bearing surfaces with crankshaft ends supportedApply Suzuki Super Grease "A" or suitable high temperature grease to lip portion of crankshaft seals prior to in stallation
OUTBOARD MOTOR