2009-2010 Suzuki DF70A DF80A DF90A Outboard Service Manual, Page 300Get this manual
3A-6 Right Hand Rotation Unit: 5) Set the clutch control lever (3) at "Neutral" position, then slide the lower unit (4) into place, ensuring that the top of driveshaft engages properly with driven gear shaft and that water tube locates in water pump case outletNOTE In order for shift rod and clutch rod splines to be aligned correctly, clutch rod may need to be turned slightly right or left Water Pump Removal and Installation
Removal 1) Remove the lower unitRefer to "Lower Unit Removal and Installation" (Page 3A-5)2) Loosen four bolts (1), then remove water pump case (2)
Z9J0113106012
I9J011310028-01
I9J011310026-01
6) Apply suzuki silicone seal to five gearcase bolts and tighten them to specified torque: Sealant 9900031120 (SUZUKI Silicone Seal (50 g)) Tightening torque Gearcase bolt (a): 55 Nm (5.5 kgf-m, 40.0 lbf-ft)