2009-2010 Suzuki DF70A DF80A DF90A Outboard Service Manual, Page 298Get this manual
3A-4 Right Hand Rotation Unit:
Propeller Removal and Installation!
Z9J0113106002
WARNING
Installation 1) Coat the propeller shaft splines liberally with Suzuki water resistant grease: Grease 9900025161 (SUZUKI Water Resistant Grease (250 g)) 2) Install propeller stopper (1) onto propeller shaft, then slide on the propeller (2)3) Fit spacer (3), washer (4) and nut (5), then tighten nut to specified torque4) Push cotter pin (6) through nut and shaft, then bend to secureTightening torque Propeller nut (a): 55 Nm (5.5 kgf-m, 40.0 lbf-ft)
When installing or removing the propeller, shift into "Neutral" and remove the emergency stop switch lock plate so that the motor cannot be started accidentally To prevent injury from propeller blades, wear gloves and place block of wood between the anti-cavitation plate and the propeller blade tips to lock the propeller in place before attempting to remove or install propeller nutRemoval 1) Shift to "Neutral" position2) Remove cotter pin (1) from propeller nut and remove propeller nut (2)3) Remove washer (3), spacer (4), propeller (5) and stopper (6) from the propeller shaft