2009-2010 Suzuki DF70A DF80A DF90A Outboard Service Manual, Page 281Get this manual
Power Trim and Tilt: Installation Installation is reverse order of removal with special attention to the following steps Lower tilt rod to full down position Apply water resistant grease to the tilt cylinder lower shaft and lower shaft bushingsInstall the lower shaft bushings (1) to PTT unit: Grease 9900025161 (SUZUKI Water Resistant Grease (250 g))
Place the PTT unit (with lower clamp bracket) in position between the clamp brackets
I9J011220075-01
Tighten four lower clamp bracket bolts (6), pre-coated with thread lock, to specified torque1 1