2009-2010 Suzuki DF70A DF80A DF90A Outboard Service Manual, Page 255Get this manual
Housing and Bracket: Install lower mount cover (12) and cover bolts (13), then tighten bolts, pre-coated with thread lock, to specified torqueTightening torque Lower mount cover bolt (b): 50 Nm (5.0 kgf-m, 36.0 lbf-ft)
Engine Holder Inspect the engine holderReplace if cracked, damaged, or other abnormal conditions are noted Check water passageIf clogged or obstructed, clean water passage Visually check the clutch shaft bearingReplace if pitted, noisy, rough or other abnormal conditions are found Check the clutch shaft oil sealReplace the oil seal if nicked, cut, worn or other abnormal conditions are found
I9J011210059-01