2009-2010 Suzuki DF70A DF80A DF90A Outboard Service Manual, Page 159Get this manual
Power Unit Mechanical:
4) Apply engine oil to conrod boltsTighten conrod cap bolts in three steps as followsa) Lightly seat all conrod bolts at first, then tighten bolts 12 (1.2 kgf-m, 8.7 lbf-ft) of specified torqueTightening torque Conrod cap bolt (1st step): 12 Nm (1.2 kgfm, 8.7 lbf-ft) b) Tighten bolts 17 (1.7 kgf-m, 12.3 lbf-ft) of specified torqueI9J011140235-02
3) Install conrod capa) Apply molybdenum oil solution to crank pin and conrod bearingb) Install dowel pins (2) and conrod cap (3) (with bearing) to conrod with embossed mark on the cap toward flywheel sideCAUTION Reassemble each conrod cap to its original positionDo not mix them in position