2009-2010 Suzuki DF70A DF80A DF90A Outboard Service Manual, Page 127Get this manual
Power Unit Mechanical: Install the engine holder seal (3)NOTE Install seal (3) with lip facing upward 1D-16
Apply suzuki silicone seal to power unit mounting bolts and tighten bolts to specified torque: Sealant 9900031120 (SUZUKI Silicone Seal (50 g)) Tightening torque Power unit mounting bolt (8 mm): 23 Nm (2.3 kgf-m, 16.5 lbf-ft) Power unit mounting bolt (10 mm): 50 Nm (5.0 kgf-m, 36.0 lbf-ft)
I9J011140155-01
NOTE Before installing power unit, apply sealant to the four hatched areas shown in the illustration at below: Sealant 9900031140 (SUZUKI Bond 1207B (100 g))