2009-2010 Suzuki DF70A DF80A DF90A Outboard Service Manual, Page 115Get this manual
Power Unit Mechanical: Installation Installation is reverse order of removal with special attention to the following steps Clean sealing surface on cylinder head and cover Remove oil, old sealant, and dust from sealing surfaces After cleaning, apply sealant to cylinder head sealing surface area as shown in figure: Sealant 9900031140 (SUZUKI Bond 1207B (100 g))
Install cylinder head cover (2) to cylinder head, then tighten cylinder head cover bolts to specified torqueTightening torque Cylinder head cover bolt (a): 11 Nm (1.1 kgf-m, 8.0 lbf-ft)
I9J011140090-01