2009-2010 Suzuki DF70A DF80A DF90A Outboard Service Manual, Page 111Get this manual
Engine Electrical Devices:
Trim Sensor Inspection
Z9J0111306018
1) Turn ignition switch OFF2) Connect 3-pin test cord between trim sensor and wire harness as shown in figure
5) Connect tester probe as shown in the illustrationCheck for sensor output voltageOperate the PTT switch, and check if voltage changes linearly within specification, according to trimtilt positionSensor output voltage TrimTilt position Full trim down Full tilt up Output voltage Approx0.9 Approx4.0 V
Output voltage
I9J011130050-03
1Trim sensor