2003+ Suzuki DF9.9/DF15 four stroke outboard motors service manual, Page 152Get this manual

2003+ Suzuki DF9.9/DF15 four stroke outboard motors service manual, Page 152

MID UNIT

INSTALLATION Installation is reverse order of removal with the special attention to the following stepsTiller handle assembly Apply the grease to the tiller handle bolt and tighten the bolt to the specified torque# 99000-25160: SUZUKI WATER RESISTANT GREASEHandle pivot bolt: Nm (0.6 kgf-m, 4.5 lb-ft)

Tighten the tiller handle nut to the specified torque" Handle pivot nut: 23 Nm (2.3 kgf-m, 16.5 lb-ft)

Back to 2003+ Suzuki DF9.9/DF15 four stroke outboard motors service manual