2003+ Suzuki DF9.9/DF15 four stroke outboard motors service manual, Page 139Get this manual
POWER UNIT
6Apply the engine oil to the crank journal, the crank pin and the conrod7Install the crankshaft to the cylinderNOTE: When installing the crankshaft to the cylinder, be sure to fit the oil seal tabs in the grooves of the cylinder
8Apply the engine oil to the conrod cap9Install the conrod cap to the cylinder! Reassemble each conrod cap to its original position10Apply the engine oil to the conrod cap bolts11Tighten the bolts to the specified torque Conrod cap bolt: 12 Nm (1.2 kgf-m, 8.5 lb-ft)