2003+ Suzuki DF9.9/DF15 four stroke outboard motors service manual, Page 136Get this manual
POWER UNIT
REASSEMBLY
Reassembly is reverse order of disassembly with the special attention to the following steps: If the original components are not replaced, each piston, piston pin and conrod is to be assembled and installed in the original order and position Do not re-use the gasket, oil seal, O-ring and circlip once removedAlways use new partsPISTON TO CONROD 1Apply the engine oil to the piston pin 2, piston pin bore and the conrod 32Fit the conrod to the piston as shown in the figure and insert the piston pin through the piston and the conrod3Install the piston pin circlips 4