1996-2005 Suzuki DF40, DF50 Four Stroke Outboard Service Manual, Page 469Get this manual
DF4050 "K5" ('05) MODEL
INSTALLATION Installation is reverse order of removal with special attention to the following steps Install starter motor and stator base, then tighten stator base mounting bolts securelyStator base mounting bolt: mm 23 Nm (2.3 kg-m, 16.5 lb-ft) mm 10 Nm (1.0 kg-m, 7.0 lb-ft) DISASSEMBLY When overhauling starting motor, it is recommended that component parts be cleaned thoroughlyHowever, the yoke assembly, armature coil, over-running clutch assembly, magnetic switch assembly, and rubber or plastic parts should not be washed in degreasing tank or with grease dissolving solventThese parts should be cleaned with compressed air or wiped with clean cloth