1996-2005 Suzuki DF40, DF50 Four Stroke Outboard Service Manual, Page 392Get this manual
DF40DF50 "K1" (01) model 13-56 INSTALLATION Installation is reverse order of remove with special attention to following steps Install release lever 1, bolt and lock nut as shownTighten the bolt first, then the lock nut Apply grease to the cylinder lower shaft, cylinder upper shaft and bushes99000-25161Suzuki Washer Resistant Grease Tighten the clamp bracket shaft nut to specified torqueClamp bracket shaft nut43 Nm (4.3 kg-m, 31.0 lb-ft) Tighten the lower shaft bolts, pre-coated with thread lock, to specified torque99000-32050Thread Lock "1342" Lower shaft bolt23 N.m (2.3 kg-m, 16.5 lb-ft)