Mercury Mariner V-250 V-275 Outboard Service Shop Manual 1990, Page 148Get this manual
56Insta ll trigger assembly and bleed hoses 57Install stator assembly and secure stator to powerhead with allen screwsApply LOCTITE 271 to threads of allen screwsTorque screws to 50 lbin(5.6 Nm) for 15 amp slators and 150 lbin (16.9 Nm) for 40 amp slators
aStatorScrews (4 Each)
aigger Assembly
b Bleed Hoses
IMPORTANT: The following serial numbers 275 HP models00086818 and Up XL00086876 and Up XXL00090719 and Up have new design upper crankshaft bearing wilh bleed fitting This bearing DOES NOT backflt older model 250275 HP enginesRefer to bleed hose diagram for correcl routing of bleed hoseBleed hose between upper bearing and block is secured with slastrapsThe sta-strap securing the bleed hose to the upper bearing MUST BE POSITIONED AS SHOWN or Interference with the trigger assembly will occur