Mercury Mariner Service Manual 6, 8, 9.9 210CC Sailpower, Page 17Get this manual
TRIGGER Removal
2Install clamp (a) on wire harness (b)
1Remove flywheel2Remove bolts which secure stator and alternator (if equipped) to powerhead3Disconnect trigger leads from switch box4Remove clamp (a) 5Lift stator and alternator (if equipped) from powerhead; position stator and alternator (if equipped) so trigger can be lifted from powerhead without interfering6Pry spark advance rod end (b) from trigger (c) using screwdriver7Lift trigger up and disconnect link rod (d)Remove trigger from powerhead