Mercury Mariner Outboard 225 3 Litre Service Manual 1994, Page 274Get this manual
Bearing Carrier Assembly REMOVAL
Remove the bearing carrier retainer using the
Bearing Carrier Retainer Wrench (9161069)Straighten the tab on the tab washer
aBearing Carrier Retainer Wrench
aTab 00 Tab Washer
Pull the bearing carrier from the gear housing by pull
ing on the outer ring of the bearing carrierPOSITION
PULLER JAWS CLOSE TO BOSSES IN CARRIERNOTE: If the bearing carrier is seized in the gear housing, it may be necessary to use heat to loosen the carrierRemove the bearing carrier retainer following step or as follows: